Actual screen for the LE model is as depicted below.

TG450-LE: Single tube intermittent motion vertical form fill seal machine (VFFS) bag maker

Principle Features

• Clutch-brake film transport system.
• Pneumatically-operated, intermittent motion cross seal jaws.
• Allen Bradley CompactLogix control system with PanelView 400 operator interface incorporating keypad and display screen.
• Simple menu-based multiple programme storage and retrieval function.
• Simple and fast bag size changeover with one-piece forming sets.
• Full synchronisation for feed systems.
• Fully interlocked guarding system.
• Film reel runout device.
• Quick release, top-loading film reel air mandrel.
• Full configuration for polyethylene and/or heatseal materials.
• Independent temperature adjustment.
• Automatic out of tolerance monitoring for heatseal elements with instantaneous machine stoppage.
• Horizontal jaw obstruction detection, incorporating instantaneous machine stoppage.
• Self-centering film friction-driven transport system.

Optional Features

• Left or right hand positioning of the combined electrical control cabinet and operator interface panel.
• Fully enclosed stainless steel or painted mild steel construction.
• Stainless steel top tray.
• Single or twin drop-on, air operated film reel mandrels.
• Heatseal and/or DigiPoly (impulse weld) horizontal cross seal jaws and vertical backseal.
• Early tip hopper.
• Gas flushing.
• Static eliminator.
• Voltage surge protection.
• Full bag take-off elevator.
• Full bag rotary take-off table.
• Block bottom and/or gusset.
• Powered film reel unwind unit.
• Synchronisation for printer or labeller.
• Film reel runout advance warning.
• Metal detection.
• Forming set inner tubes.
• Printer.
• Labeller.
• Bag clip attachment.
• Jaw Options:
  • nick knife.
  • date coding.
  • strip pack.

• 80mm minimum/450mm maximum on pillow pack (3.1 to 17.70in).

• Up to 600mm on a single pull (23.60in).

• Up to 50 bags/minute.

TG450-L: Single tube intermittent motion vertical form fill seal machine (VFFS) bag maker

Principle Features

• Clutch-brake film transport system.
• Pneumatically-operated, intermittent motion cross seal jaws.
• Allen Bradley ControlLogix control system with PanelView 1000 touch screen operator interface with choice of languages and access restriction feature.
• Simple menu-based rapid storage and retrieval function for 50 product recipes.
• Simple and fast bag size changeover with one-piece forming sets.
• Full synchronisation for feed systems.
• Fully interlocked guarding system.
• Film reel runout device.
• Quick release, top-loading film reel air mandrel.
• Full configuration for polyethylene and/or heatseal materials.
• Independent temperature adjustment.
• Automatic out of tolerance monitoring for heatseal elements with instantaneous machine stoppage.
• Horizontal jaw obstruction detection, incorporating instantaneous machine stoppage.
• Self-centering film transport system.

Optional Features

• Left or right hand positioning of the combined electrical control cabinet and operator interface panel.
• Fully enclosed stainless steel or painted mild steel construction.
• Stainless steel top tray.
• Single or twin drop-on, air operated film reel mandrels.
• Heatseal and/or DigiPoly (impulse weld) horizontal cross seal jaws and vertical backseal.
• Vacuum assisted belt-driven film transport.
• Semi- or fully-automatic film tracking control.
• Early tip hopper.
• Gas flushing.
• Static eliminator.
• Voltage surge protection.
• Full bag take-off elevator.
• Full bag rotary take-off table.
• Block bottom and/or gusset.
• Powered film reel unwind unit.
• Synchronisation for printer or labeller.
• Film reel runout advance warning.
• Film splicing attachment.
• Metal detection.
• Forming set inner tubes.
• Printer.
• Labeller.
• Bag clip attachment.
• Bag metering.
• Bag shaker.
• Bag support and discharge unit.
• Bag vibrator and discharge unit.
• Bag deflator.
• Servo film transport system.
• Ethernet connection for MIS/SCADA systems.
• Additional powered nip drive unit - only available with servo transport system.
• Jaw Options:
  • nick knife.
  • date coding.
  • strip pack.
  • punch hole.
  • carrier bag handle.
  • heated Euroslot
• Snack Options:
  • product catchers
  • infeed poker.
  • bag stripper.

• 80mm minimum/450mm maximum on pillow pack (3.1 to 17.70in).

• Up to 600mm on a single pull (23.60in).

• Up to 60 bags/minute.

TG450-LD: Single tube intermittent motion vertical form fill seal machine (VFFS) bag maker

Principle Features

• Servo-driven film transport system.
• Servo-driven, intermittent motion cross seal jaws.
• Allen Bradley ControlLogix control system with PanelView 1000 touch screen operator interface with choice of languages and access restriction feature.
• Simple menu-based rapid storage and retrieval function for 50 product recipes.
• Simple and fast bag size changeover with one-piece forming sets.
• Full synchronisation for printers, labellers and feed systems.
• Fully interlocked guarding system.
• Film reel runout device.
• Quick release, drop-on film reel air mandrel.
• Full configuration for polyethylene and/or heatseal materials.
• Independent temperature adjustment.
• Automatic out of tolerance monitoring for heatseal elements with instantaneous machine stoppage.
• Horizontal jaw obstruction detection, incorporating instantaneous machine stoppage.
• Friction drive film transport belts.
• Semi-automatic film tracking.
• Stainless steel top tray.
• Manual film splicing attachment.
• Self-centering film transport system.

Optional Features

• Left or right hand positioning of the electrical control cabinet.
• Left or right hand positioning of the operator interface panel, irrespective of cabinet position.
• Fully enclosed stainless steel or painted mild steel construction.
• Single or twin drop-on, air operated film reel mandrels.
• Heatseal and/or DigiPoly (impulse weld) horizontal cross seal jaws and vertical backseal.
• Fully-automatic film tracking control.
• Early tip hopper.
• Gas flushing.
• Static eliminator.
• Voltage surge protection.
• Full bag take-off elevator.
• Full bag rotary take-off table.
• Block bottom and/or gusset.
• Powered film reel unwind unit.
• Film reel runout advance warning.
• Metal detection.
• Forming set inner tubes.
• Printer.
• Labeller.
• Bag clip attachment.
• Bag metering.
• Bag shaker.
• Bag support and discharge unit.
• Bag vibrator and discharge unit.
• Bag deflator.
• Ethernet connection for MIS/SCADA systems.
• Additional powered nip drive unit.
• Transverse zip applicator.
• Jaw Options:
  • nick knife.
  • date coding.
  • strip pack.
  • punch hole.
  • carrier bag handle.
  • heated Euroslot.
  • Snack Options:
  • product catchers.
  • infeed poker.
  • bag stripper.

Bag Size (width)

• 80mm minimum/450mm maximum on pillow pack (3.1 to 17.70in).

• Up to 600mm on a single pull (23.60in).

• Up to 70 bags/minute.